Sorption and desorption of diuron on Typic Argiudoll, Oxic Argiudoll and on their clay fractions: environmental aspects.

The sorption and desorption of diuron by soil samples from Horizons A and B (HA and HB) and by their different clay fractions were investigated, using two soil samples, classified as Typic Argiudoll and Oxic Argiudoll. The sorption and desorption curves were adjusted to the Freundlich model and evaluated by parameters Kf, Kd and Koc. Based on the data of groundwater ubiquity score (GUS), leachability index (LIX) and hysteresis index (HI), the risk of groundwater pollution was evaluated. The Kd values obtained for soil samples were between 4.5 mL g-1 (Oxic Argiudoll - HB) and 15.9 mL g-1 (Typic Argiudoll - HA) and between 1.13 and 14.0 mL g-1 for the different mineral fractions, whereas the Koc values varied between 276 (Oxic Argiudoll - HB) and 462 (Typic Argiudoll - HA). According to the parameter GUS, only Oxic Argiudoll - HB presented leaching potential, and based on the LIX index this same soil presented the highest leaching potential. Some samples presented low LIX and GUS values, indicating no leaching potential, but none presented HI results indicative of hysteresis, suggesting weak bonds between diuron and the soil samples and, hence, the risk of groundwater pollution by diuron.

A novel determination method for diuron in seaweed samples: Combination of quadruple isotope dilution strategy with liquid chromatography - quadrupole time of flight - tandem mass spectrometry for superior accuracy and precision.

This paper proposed an accurate and sensitive analytical method based on the combination of Liquid Chromatography-Quadrupole Time of Flight-Tandem Mass Spectrometry (LC-QTOF-MS/MS) system with Quadruple Isotope Dilution-Mass Spectrometry (ID4MS) strategy for the determination of diuron at trace levels. In order to achieve accurate and reliable determination of the analyte, ID4MS strategy that uses stable isotopically labelled analogues was employed. Diuron-d6 was synthesized in the laboratory using a novel strategy and employed in ID4MS for the preparation of three calibration blends and seaweed sample blend. The analytical performance of the LC-QTOF-MS/MS method was evaluated and the respective detection and quantification limits obtained were 14.6 µg kg-1 and 46.5 µg kg-1. Good linearity was obtained with a correlation coefficient of 0.9995 over the dynamic range from 50 to 1000 µg kg-1. The validity of the method was successfully tested by carrying out spiking experiments in seaweed samples. The percent recovery value showed superior enhancement for ID4MS strategy (99.97 ± 0.41%) confirming the applicability of the method to complex matrices with great accuracy and precision.

Photo-Fenton process at natural conditions of pH, iron, ions, and humic acids for degradation of diuron and amoxicillin.

Effect of ferric ions at concentrations typically found in natural waters (0.05 to 1.06 mg L-1) and low H2O2 concentrations (between 0.5 and 17.9 mg L-1) on simulated sunlight-induced (300 W m-2) photo-Fenton degradation at initial neutral pH (7.0) of amoxicillin and diuron in Milli-Q water was studied using an rotatable central composite experimental design 22 with a central and two axial points. H2O2 concentration was the parameter playing the key role on the degradation of both pollutants. Despite that initial pH was 7.0 in Milli-Q water, this latter decreased rapidly in the first minutes, reaching values of 3.5 and 5.0 for diuron and amoxicillin respectively after 15 min of simulated sunlight irradiation. In contrast, in presence of bicarbonate/carbonate (HCO3-/CO3=), fluoride (F-), and humic acids (HAs) at concentrations found often in surface and well waters with ferric ion and H2O2 concentrations of 0.3 and 9.7 and 15.2 mg L-1 respectively, both pollutants exhibited a strong degradation keeping the circumneutral pH. Amoxicillin and diuron degradation byproducts found by HPLC/MS were compatible with HO• and/or CO3-• radical attack. Several photo-induced processes such as photo-Fenton (by dissolved ferric-HA complexes), heterogeneous photocatalysis (by colloidal iron), UV-B H2O2 photolysis, irradiated-dissolved organic matter, and their reactions with pollutants would be the main oxidative route responsible of degradations. These findings demonstrated that it could be possible using iron concentrations often found in natural waters to oxidize via photo-Fenton processes among other events, organic pollutants at natural pH conditions.

Use of neural networks to estimate the sorption and desorption coefficients of herbicides: A case study of diuron, hexazinone, and sulfometuron-methyl in Brazil.

The use of herbicides in Brazil has been carried out based on the manufacturer's recommendation, often disregarding the high variability of soil attributes. The use of statistical methods to predict the herbicide retention processes in the soil can contribute to the improvement of weed control efficiency associated with the lower risk of environmental contamination. This research evaluated the use of Artificial Neural Networks (ANNs) to predict soil sorption and desorption, as well as the environmental contamination potential of diuron, hexazinone and sulfometuron-methyl herbicides in Brazilian soils. The sorption and desorption coefficients of the three herbicides were determined in laboratory tests for 15 soils from different Brazilian states. To predict the sorption and desorption of diuron, hexazinone and sulfometuron-methyl were used a multilayer perceptron ANNs (MLP). The inputs were the characteristics of the herbicides and the physical and chemical attributes of the soils, and the outputs of were the sorption and desorption coefficients (Kfs and Kfd). The risk of leaching of diuron, hexazinone, and sulfometuron-methyl herbicides were evaluated considering the sorption values observed and those estimated by the models. The Artificial Neural Network (ANN) models were efficient for the prediction of sorption and desorption of diuron, hexazinone, and sulfometuron-methyl herbicides. The physicochemical properties of the herbicides were more important for the modeling of multilayer perceptron ANNs than the soil attributes. The herbicides diuron, hexazinone, and sulfometuron-methyl have a high potential risk for contamination of groundwater in different Brazilian states.

Heterogeneous photocatalytic degradation of diuron on zinc oxide: Influence of surface-dependent adsorption on kinetics, degradation pathway, and toxicity of intermediates.

Heterogeneous photocatalytic reaction has been generally applied for degradation of toxic contaminants. Degradations of a compound using the same kind of catalyst that was synthesized differently are commonly found in literature. However, the reported degradation intermediates are normally inconsistent. This issue is especially important for the degradation of toxic compounds because intermediates may be more toxic than their parent compounds and understanding the reason is necessary if appropriate catalysts are to be designed. This work systematically compares the photocatalytic degradation of diuron, a toxic recalcitrant herbicide, on two forms of zinc oxide (ZnO), i.e., conventional particles with zinc- and oxygen-terminated polar surfaces as the dominating planes, and nanorods with mixed-terminated nonpolar surfaces. Experimental and theoretical results indicate that both the rate of reaction and the degradation pathway depend on the adsorption configuration of diuron onto the surface. Diuron molecules adsorb in different alignments on the two surfaces, contributing to the formation of different degradation intermediates. Both the aliphatic and aromatic sides of diuron adsorb on the polar surfaces simultaneously, leading to an attack by hydroxyl radicals from both ends. On the other hand, on the mixed-terminated surface, only the aliphatic part adsorbs and is degraded. The exposed surface is therefore the key factor controlling the degradation pathway. For diuron degradation on ZnO, a catalyst confined to mixed-terminated surfaces, i.e., ZnO nanorods, is more desirable, as it avoids the formation of intermediates with potent phytotoxicity and cytogenotoxicity.

Preparation of core-shell magnetic molecularly imprinted polymer nanoparticle for the rapid and selective enrichment of trace diuron from complicated matrices.

A novel magnetic MIPs (DUMIPs) was prepared by surface molecular imprinting method using superparamagnetic core-shell nanoparticle (Fe3O4@SiO2) as the sacrificial support matrix, herbicide diuron as template, α-methacrylic acid as the functional monomer, trimethylolpropane trimethacrylate as the crosslinker, azobisisobutyronitrile as the initiator, and acetonitrile as the porogen. Highly cross-linked porous surface and excellent magnetic property were characterized by Fourier-transform infrared spectroscopy, transmission electron microscopy, and vibrating sample magnetometer, respectively. The adsorption capacity of DUMIPs was 8.1 mg g-1, 2.6-fold over its corresponding non-imprinted polymers (DUNIPs). The adsorption in DUMIPs was considered as multilayer adsorption and posed high affinity to diuron, due to the better fitting to Freundilich isotherm. Competitive recognition study demonstrated DUMIPs had highly selective binding diuron. DUMIPs, as an influential sorbent has been used for selective extraction of diuron from environmental samples (paddy field water, paddy soil and grain seedlings) and the elution was determined by high efficiency liquid chromatography (HPLC). In this analytical method, various factors affecting the extraction efficiency such as pH, sorbent dosage, utilization efficiency and volumes of eluent were simultaneously investigated. Under the optimal conditions, the linearity of the method obtained is in the range of 0.02-10.0 mg L-1. The limit of detection is 0.012 mg L-1. In four spiked levels (0.04, 0.2, 1.0, and 4.0 mg kg-1), the recoveries of diuron in real samples are in the range of 83.56%-116.10% with relative standard deviations in the range of 1.21-6.81%. Importantly, compared to C18-SPE column, the MMIPs exhibited convenient separation by external magnetic field, strong clean-up capacity, and selective enrichment for diuron. Thus, the DUMIPs-based method is great potential for efficient sample preparation in the determination of trace amounts of diuron residues in complex matrices.

Steam activation of waste biomass: highly microporous carbon, optimization of bisphenol A, and diuron adsorption by response surface methodology.

Highly microporous carbons were prepared from argan nut shell (ANS) using steam activation method. The carbons prepared (ANS@H2O-30, ANS@H2O-90, and ANS@H2O-120) were characterized using X-ray diffraction, scanning electron microscopy, Fourier-transform infrared, nitrogen adsorption, total X-ray fluorescence, and temperature-programmed desorption (TPD). The ANS@H2O-120 was found to have a high surface area of 2853 m2/g. The adsorption of bisphenol A and diuron on ANS@H2O-120 was investigated. The isotherm data were fitted using Langmuir and Freundlich models. Langmuir isotherm model presented the best fit to the experimental data suggesting micropore filling of ANS@H2O-120. The ANS@H2O-120 adsorbent demonstrated high monolayer adsorption capacity of 1408 and 1087 mg/g for bisphenol A and diuron, respectively. The efficiency of the adsorption was linked to the porous structure and to the availability of the surface adsorption sites on ANS@H2O-120. Response surface method was used to optimize the removal efficiency of bisphenol A and diuron on ANS@H2O-120 from aqueous solution. Graphical abstract ᅟ.

Visible-light photoelectrodegradation of diuron on WO3 nanostructures.

The degradation of pesticide diuron has been explored by photoelectrocatalysis (PEC) under visible light illumination using two different WO3 nanostructures, obtained by anodization of tungsten. The highest degradation efficiency (73%) was obtained for WO3 nanosheets synthesized in the presence of small amounts of hydrogen peroxide (0.05 M). For that nanostructure, the kinetic coefficient for diuron degradation was 133% higher than that for the other nanostructure (anodized in the presence of fluoride anions). These results have been explained by taking into account the different architecture and dimensions of the two WO3 nanostructures under study.

Polar pesticide contamination of an urban and peri-urban tropical watershed affected by agricultural activities (Yaoundé, Center Region, Cameroon).

Urban agriculture is crucial to local populations, but the risk of it contaminating water has rarely been documented. The aim of this study was to assess pesticide contamination of surface waters from the Méfou watershed (Yaoundé, Cameroon) by 32 selected herbicides, fungicides, and insecticides (mainly polar) according to their local application, using both grab sampling and polar organic compounds integrative samplers (POCIS). Three sampling campaigns were conducted in the March/April and October/November 2015 and June/July 2016 rainy seasons in urban and peri-urban areas. The majority of the targeted compounds were detected. The quantification frequencies of eight pesticides were more than 20% with both POCIS and grab sampling, and that of diuron and atrazine reached 100%. Spatial differences in contamination were evidenced with higher contamination in urban than peri-urban rivers. In particular, diuron was identified as an urban contaminant of concern because its concentrations frequently exceeded the European water quality guideline of 0.200 µg/L in freshwater and may thus represent an ecological risk due to a risk quotient > 1 for algae observed in 94% of grab samples. This study raises concerns about the impacts of urban agriculture on the quality of water resources and to a larger extent on the health of the inhabitants of cities in developing countries. Graphical abstract ᅟ.

On the origin of the slow M-T chlorophyll a fluorescence decline in cyanobacteria: interplay of short-term light-responses.

The slow kinetic phases of the chlorophyll a fluorescence transient (induction) are valuable tools in studying dynamic regulation of light harvesting, light energy distribution between photosystems, and heat dissipation in photosynthetic organisms. However, the origin of these phases are not yet fully understood. This is especially true in the case of prokaryotic oxygenic photoautotrophs, the cyanobacteria. To understand the origin of the slowest (tens of minutes) kinetic phase, the M-T fluorescence decline, in the context of light acclimation of these globally important microorganisms, we have compared spectrally resolved fluorescence induction data from the wild type Synechocystis sp. PCC 6803 cells, using orange (λ = 593 nm) actinic light, with those of mutants, ΔapcD and ΔOCP, that are unable to perform either state transition or fluorescence quenching by orange carotenoid protein (OCP), respectively. Our results suggest a multiple origin of the M-T decline and reveal a complex interplay of various known regulatory processes in maintaining the redox homeostasis of a cyanobacterial cell. In addition, they lead us to suggest that a new type of regulatory process, operating on the timescale of minutes to hours, is involved in dissipating excess light energy in cyanobacteria.

Acute and chronic toxicity of diuron and carbofuran to the neotropical cladoceran Ceriodaphnia silvestrii.

In order to contribute to the increase of the body of knowledge on the sensitivity of tropical indigenous species to pesticides, acute and chronic toxicity tests were conducted with the neotropical cladoceran Ceriodaphnia silvestrii. Tests were carried out with the active ingredients diuron and carbofuran and one of their commercial formulations, the Diuron Nortox® 500 SC and the Furadan® 350 SC, respectively. For carbofuran, the active ingredient was more toxic than the commercial product, whereas for diuron, the commercial product appeared more toxic. In addition, hormetic effects on fertility were recorded for intermediate diuron concentrations. Acute and chronic toxicity data indicated that C. silvestrii was among the most sensitive invertebrate species for both test compounds. Based on concentrations measured in Brazilian water bodies, these compounds represent ecological risks for causing direct and indirect toxic effects on C. silvestrii and other aquatic organisms. Our results support previous claims on the advantages of using native species to better tune ecological risk assessment of chemicals in tropical ecosystems.

Biodegradation of high doses of commercial pesticide products in pilot-scale biobeds using olive-oil agroindustry wastes.

Biobeds systems containing soil, peat and straw (SPS) are used worldwide to eliminate pesticide point-source contamination, but implantation is difficult when peat and/or straw are not available. Novel biobeds composed of soil, olive pruning and wet olive mill cake (SCPr) or its vermicompost (SVPr) were assayed at pilot scale for its use in olive grove areas. Their removal efficiency for five pesticides applied at high concentration was compared with the biobed with SPS. The effect of a grass layer on the efficiency of these biobeds was also evaluated. Pesticides were retained mainly in the upper layer. In non-planted biobeds with SCPr and SVPr, pesticides dissipation was higher than in SPS, except for diuron. In the biobed with SVPr, with the highest pesticide dissipation capacity, the removed amount of dimethoate, imidacloprid, tebuconazole, diuron and oxyfluorfen was 100, 80, 73, 75 and 50%, respectively. The grass layer enhanced dehydrogenase and diphenol-oxidase activities, modified the pesticides dissipation kinetics and favored the pesticide downward movement. One metabolite of imidacloprid, 3 of oxyfluorfen and 4 of diuron were identified by GC-MS. These novel biobeds represent an alternative to the traditional one and a contribution to promote a circular economy for the olive-oil production.

Leaching of Diuron, Hexazinone, and Sulfometuron-methyl Applied Alone and in Mixture in Soils with Contrasting Textures.

When herbicides are applied in mixture, interactions among them could potentially promote changes in herbicide behavior in the soil. Thus, application mode (isolated or in mixture) and soil texture (sandy or clayey) were investigated in the total leaching of the commercial mixture diuron + hexazinone + sulfometuron-methyl, and of each isolated compound. Experiments in soil columns also evaluated the movement of each herbicide and mixtures across soil layers. In the sandy soil, the greatest total leaching was observed with hexazinone compared to diuron and sulfometuron. Most of the applied diuron remained at the top layer of the soil, indicating that this herbicide has low soil mobility. Overall, our results show that hexazinone has greater leaching potential and mobility along the soil profile compared to diuron and sulfometuron. Our data can be used in assessing the fate of diuron, hexazinone, and sulfometuron alone or in mixture on natural ecosystems, under different soil types and application modes.

Combined effects of temperature and the herbicide diuron on Photosystem II activity of the tropical seagrass Halophila ovalis.

Tropical seagrasses are at their highest risk of exposure to photosystem II (PSII) herbicides when elevated rainfall and runoff from farms transports these toxicants into coastal habitats during summer, coinciding with periods of elevated temperature. PSII herbicides, such as diuron, can increase the sensitivity of corals to thermal stress, but little is known of the potential for herbicides to impact the thermal optima of tropical seagrass. Here we employed a well-plate approach to experimentally assess the effects of diuron on the photosynthetic performance of Halophila ovalis leaves across a 25 °C temperature range (36 combinations of these stressors across 15-40 °C). The thermal optimum for photosynthetic efficiency (▵) in H. ovalis was 31 °C while lower and higher temperatures reduced ▵ as did all elevated concentrations of diuron. There were significant interactions between the effects of temperature and diuron, with a majority of the combined stresses causing sub-additive (antagonistic) effects. However, both stressors caused negative responses and the sum of the responses was greater than that caused by temperature or diuron alone. These results indicate that improving water quality (reducing herbicide in runoff) is likely to maximise seagrass health during extreme temperature events that will become more common as the climate changes.

Biological responses to phenylurea herbicides in fish and amphibians: New directions for characterizing mechanisms of toxicity.

Urea-based herbicides are applied in agriculture to control broadleaf and grassy weeds, acting to either inhibit photosynthesis at photosystem II (phenylureas) or to inhibit acetolactate synthase acetohydroxyacid synthase (sulfonylureas). While there are different chemical formulas for urea-based herbicides, the phenylureas are a widely used class in North America and have been detected in aquatic environments due to agricultural run-off. Here, we summarize the current state of the literature, synthesizing data on phenylureas and their biological effects in two non-target animals, fish and amphibians, with a primary focus on diuron and linuron. In fish, although the acutely lethal effects of diuron in early life stages appear to be >1mg/L, recent studies measuring sub-lethal behavioural and developmental endpoints suggest that diuron causes adverse effects at lower concentrations (i.e. <0.1mg/L). Considerably less toxicity data exist for amphibians, and this is a knowledge gap in the literature. In terms of sub-lethal effects and mode of action (MOA), linuron is well documented to have anti-androgenic effects in vertebrates, including fish. However, there are other MOAs that are not adequately assessed in toxicology studies. In order to identify additional potential MOAs, we conducted in silico analyses for linuron and diuron that were based upon transcriptome studies and chemical structure-function relationships (i.e. ToxCast™, Prediction of Activity Spectra of Substances). Based upon these analyses, we suggest that steroid biosynthesis, cholesterol metabolism and pregnane X receptor activation are common targets, and offer some new endpoints for future investigations of phenylurea herbicides in non-target animals.

Effect of W doping level on TiO2 on the photocatalytic degradation of Diuron.

In the present study, three compositions of W-doped titania nano-photocatalyst are synthesized via the sol-gel method. The powders obtained were characterized by X-ray diffraction, Raman spectroscopy and UV-visible diffuse reflectance spectroscopy. The photocatalytic performances of the different photocatalysts are tested with respect to the degradation of Diuron in water solutions under simulated solar light and visible light irradiation. The W0.03Ti0.97O2 catalyst exhibits better photoactivity than the pure TiO2 even under simulated solar light and visible light. This improvement in activity was attributed to photoelectron/hole separation efficiency.

Metal inhibition on the reactivity of manganese dioxide toward organic contaminant oxidation in relation to metal adsorption and ionic potential.

Coexisting metal ions may significantly inhibit the oxidative reactivity of manganese oxides toward organic contaminants in metal-organic multi-pollutant waters. While the metal inhibition on the oxidation of organic contaminants by manganese oxides has previously been reported, the extent of the inhibition in relation to metal properties has not been established. Six alkali, alkaline, and transition metals, as well as two testing metals were evaluated for their abilities to inhibit the reactivity of birnessite. Regardless of the pathways of phenol and diuron oxidation (polymerization vs. breakdown), the extent of metal inhibition depended mainly on the metal itself and its concentration. The observed metal inhibition efficiency followed the order of Mn2+ > Co2+ > Cu2+ > Al3+ > Mg2+ > K+, consistent with metal adsorption on birnessite. The first-order organic oxidation rate constant (kobs) was linearly negatively correlated with metal adsorption (qe) on birnessite. These observations demonstrated that the metal inhibition efficiency was determined by metal adsorption on birnessite. The slopes of the kobs-qe varied among metals and followed the order of K+ > Ca2+ > Mg2+ > Mn2+ > Cd2+ > Co2+ > Cu2+ > Al3+. These slopes defined intrinsic inhibitory abilities of metals. As metals were adsorbed hydrated on birnessite, the intrinsic inhibitory ability was significantly linearly correlated with ionic potentials of metals, leading to a single straight line. Metals with multiple d electrons in the outermost orbit with polarizing energy that promotes hydrolysis sat slightly below the line, and vice versa.

Synthetic polymers blend used in the production of high activated carbon for pesticides removals from liquid phase.

For the activated carbon (AC) production, we used the most common industrial and consumer solid waste, namely polyethyleneterephthalate (PET), alone or blended with other synthetic polymer such polyacrylonitrile (PAN). By mixing PET, with PAN, an improvement in the yield of the AC production was found and the basic character and some textural and chemical properties were enhanced. The PET-PAN mixture was subjected to carbonisation, with a pyrolysis yield of 31.9%, between that obtained with PET (16.9%) or PAN (42.6%) separately. The AC revealed a high surface area (1400, 1230 and 1117 m2 g-1) and pore volume (0.46, 0.56 and 0.50 cm3 g-1), respectively, for PET, PAN and PET-PAN precursors. Selected ACs were successfully tested for 4-chloro-2-methylphenoxyacetic acid (MCPA) and diuron removal from the liquid phase, showing a higher adsorption capacity (1.7 and 1.2 mmol g-1, respectively, for MCPA and diuron) and good fits with the Langmuir (PET) and Freundlich equation (PAN and PET-PAN blend). With MCPA, the controlling factor to the adsorption capacity was the porous volume and the average pore size. Concerning diuron, the adsorption was controlled essentially by the external diffusion. A remarkable result is the use of different synthetic polymers wastes, as precursors for the production of carbon materials, with high potential application on the pesticides removals from the liquid phase.

Determination of diffusion coefficients of biocides on their passage through organic resin-based renders.

In this study the diffusion coefficients of isoproturon, diuron and cybutryn in acrylate and silicone resin-based renders were determined. The diffusion coefficients were determined using measuring concentrations of biocides in the liquid phase after being in contact with renders for specific time intervals. The mathematical solution of the transient diffusion equation for an infinite plate contacted on one side with a limited volume of water was used to calculate the diffusion coefficient. The diffusion coefficients through the acrylate render were 8.10·10(-9) m(2) s(-1) for isoproturon, 1.96·10(-9) m(2) s(-1) for diuron and 1.53·10(-9) m(2) s(-1) for cybutryn. The results for the silicone render were lower by one order of magnitude. The compounds with a high diffusion coefficient for one polymer had likewise high values for the other polymer.

Hot foam for weed control-Do alkyl polyglucoside surfactants used as foaming agents affect the mobility of organic contaminants in soil?

Use of alkyl polyglucosides (APGs) as a foaming agent during hot water weed control may influence the environmental fate of organic contaminants in soil. We studied the effects of the APG-based foaming agent NCC Spuma (C8-C10) on leaching of diuron, glyphosate, and polycyclic aromatic hydrocarbons (PAHs) in sand columns. We also examined how APG concentration affected the apparent water solubility and adsorption of the herbicides and of the PAHs acenaphthene, acenaphthylene and fluorene. Application of APGs at the recommended concentration of 0.3% did not significantly affect leaching of any of the compounds studied. However, at a concentration of 1.5%, leaching of both diuron and glyphosate was significantly increased. The increased leaching corresponded to an increase in apparent water solubility of diuron and a decrease in glyphosate adsorption to the sand. However, APG addition did not significantly affect the mobility of PAHs even though their apparent water solubility was increased. These results suggest that application of APG-based foam during hot water weed control does not significantly affect the mobility of organic contaminants in soil if used according to recommendations. Moreover, they suggest that APGs could be useful for soil bioremediation purposes if higher concentrations are used.